INTRODUCTION
The Toslink splitter splits a single S/PDIF (Toslink) Digital Optical Audio signal into five outputs. It allows you to connect a single optical audio source, such as the output of a gaming console or Blu-ray player, to five devices, such as a television and an AV receiver, or amplifier. Provide clean accurate audio, with no distortion or signal interference.
FEATURES
- Support signal re-timing.
- Audio format support: LPCM2.0/DTS 5.1/Dolby-AC3 5.1.
- Support output transmission distance up to 40m via optical fiber cable that losses less than 0.2dB/m.
- Sampling frequency: up to 192KHz.
- Over-voltage protection.
- No loss of quality.
- Installs in minutes.
SPECIFICATIONS
Support Audio Format
- LPCM2.0/DTS/Dolby Digital
Peak Wavelength
- 650nm
Max Baud Rate
- 16Mbps
Output Cable Distance
- ≤40m(Use the optical fiber cable loss less the 0.2dB/m)
Power Supply
- USB Power Cable
Operating Temperature Range
- (0℃ to 40℃)
Operating Humidity Range
- 5% to 90%RH(no condensation)
Note: Specifications are subject to change without notice.
